How It Works

Four Steps. A Few Minutes. Done.

01

Prepare

Cut Solar Patch to size and shape with scissors or a utility knife. Wipe the surface clean and dry first — no sanding or primer needed.

02

Peel

Peel back the liner to expose the peel-and-stick backing. Keep the patch out of direct sunlight until you're ready to cure.

03

Apply

Press the patch onto the damaged area with firm, even pressure so it makes full contact across the whole repair.

04

Cure

Give it 5–10 minutes in direct sunlight. No sun? A UV light cures it on the same timeline — indoors or at night.

Solar Patch is a fiberglass-reinforced patch with a peel-and-stick backing. Press it over the damage, then let UV light — from the sun or a UV lamp — cure it rock-hard in minutes. No mixing, no measuring, no mess.