Safety Data Sheet
Solar Patch — Safety Data Sheet
Prepared under the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). Please read all sections before handling or applying Solar Patch.
Reference: ST/SDS/009 · Revision: 009 · Date of issue: 1 June 2026
Download Official SDS (PDF)The downloadable PDF is the controlled, authoritative version of this document.
01Identification
02Hazards Identification
Classified per the Globally Harmonized System of Classification and Labelling of Chemicals.
Pictograms: GHS07 (exclamation mark) · GHS08 (health hazard)
Hazard statements
- Harmful if swallowed.
- Causes eye irritation.
- May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- May cause an allergic skin reaction.
- Suspected of causing cancer.
Precautionary — prevention
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Wash hands thoroughly after handling.
- Avoid breathing dust or vapors.
- Contaminated work clothing must not be allowed out of the workplace.
- Wear protective gloves / protective clothing / eye protection / face protection.
Precautionary — response
- If swallowed: Call a Poison Center / doctor if you feel unwell.
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, get medical advice/attention.
- If on skin: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention.
- Wash contaminated clothing before reuse.
- If exposed or concerned: Get medical advice/attention.
Storage: See Section 7. Disposal: Dispose of contents/container in accordance with local/regional regulations.
03Composition / Information on Ingredients
04First Aid Measures
General advice: Avoid contact with skin and eyes.
Skin: Wash off immediately with soap and plenty of water.
Eye contact: Flush with plenty of water. Consult a physician. Show this Safety Data Sheet to the doctor in attendance.
Inhalation: Remove to fresh air.
05Fire-Fighting Measures
Fire-fighting instructions: Recommended protective clothing; full-face, self-contained MSHA/NIOSH-approved breathing apparatus.
Unusual fire and explosive hazards: None.
06Accidental Release Measures
Personal precautions: Avoid contact with skin and eyes.
Environmental precautions: Do not let product enter drains.
Methods for cleaning up: Solar Patch is a flexible solid and cannot leak or spill. In case of accidental release, remove the source of ignition and place the product in containers such as covered steel drums to await disposal. Wear appropriate personal protective equipment.
07Handling and Storage
Handling: Use only in well-ventilated areas. Keep away from heat and sources of ignition. Follow general industrial hygiene practice.
Storage: For maximum storage life and to maintain material workability, store below 72°F (22°C). Material is packaged in special bags impermeable to styrene. Do not puncture the bag. Reseal after partial use.
08Exposure Controls / Personal Protection
Engineering controls: Engineering controls are not necessary if good hygiene practices are followed. Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water. Avoid unnecessary skin contact. Impervious gloves and apron are recommended to prevent skin contact. For operations where eye or face contact can occur, wear eye protection such as chemical or splash-proof goggles or a face shield. Where exposures are below the permissible exposure limit (PEL), no respiratory protection is required; where exposures exceed the PEL, use a respirator approved by NIOSH for the material and level of exposure. Cutting, grinding, or sanding of parts fabricated after curing may create respirable dust particles; respiratory protection appropriate for this dust may be required. Gloves, a long-sleeved shirt, and safety glasses are recommended to prevent contact with any dust particles generated.
Ventilation requirements: N/A if TLV/PEL not exceeded. It is recommended that all dust-control equipment (local exhaust ventilation and material-transport systems) involved in handling of this product contain explosion-relief vents, an explosion-suppression system, or an oxygen-deficient environment. Ensure that dust-handling systems (exhaust ducts, dust collectors, vessels, and processing equipment) are designed to prevent the escape of dust into the work area. Use only appropriately classified electrical equipment and powered industrial trucks.
Personal protective equipment
- Eye / face: Safety glasses / goggles to protect against dry particles.
- Skin: Impervious and abrasion-resistant.
- Respiratory: None if TLV/PEL not exceeded.
- Other clothing / equipment: None — recommend good industrial hygiene.
- Work hygienic practices: Recommend good industrial hygiene practices.
09Physical and Chemical Properties
10Stability and Reactivity
11Toxicological Information
Toxicological information on the OSHA-regulated components of this product is as follows. Styrene has an acute oral LD50 (rat) of 5 g/kg. The inhalation LC50 (rat) is 24 mg/l following a 4-hour exposure. Acute overexposure to styrene vapour may cause moderate eye and nasal irritation as well as drowsiness, headache, and central nervous system depression. Styrene is a moderate skin and eye irritant, and has been shown to cause lung tumors in mice. Epidemiological studies of styrene exposure in humans are not conclusive due to inadequate control of variables.
Acute oral (rat) and dermal (rabbit) LD50 values are estimated to be greater than 5,000 mg/kg and greater than 2,000 mg/kg, respectively. The 4-hour inhalation LC50 (rat) value is estimated to be greater than 20 mg/l. Direct contact with this material may cause minimal eye and skin irritation; inhalation overexposure may cause irritation of the respiratory tract and eyes. Inhalation overexposure to zinc stearate, alumina trihydrate, kaolin, calcium metasilicate, glass, mica, fiberglass, cellulose, iron oxide, carbon black, and talc may cause respiratory congestion and irritation.
Carcinogenicity of styrene: IARC Group 2B carcinogen.
12Ecological Information
No applicable information was found.
13Disposal Considerations
Cure waste material by exposing it to UV light (sunlight or artificial) and dispose of it as non-hazardous solid waste in accordance with local regulations.
14Transport Information
15Regulatory Information
US federal regulations — TSCA: This product is manufactured in compliance with all provisions of the Toxic Substances Control Act, 15 U.S.C. 2601 et seq.
16Other Information
SDS last date of revision: 1 June 2026.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its publication. Users of Solar Patch products should familiarize themselves with storage, handling, and application use to ensure all safety requirements are observed. No guarantee or warranty, express or implied, is made with respect to this information, and no liability is assumed as a result of its use.
For any additional material and safety information, please contact:
Solar Patch USA Inc. · 2801 S. Valley View Blvd, Las Vegas, NV 89102
302-415-5747 · Sales@SolarPatchUSA.com
www.SolarPatchUSA.com (corporate) · www.BuySolarPatch.com (retail)
This web page is provided for convenience and readability. The downloadable PDF (SDS Ref ST/SDS/009, Revision 009) is the controlled, authoritative version.